C station rotating lower die seat is a commonly used part in metal processing, mold manufacturing, automatic production and other fields. It is usually used as the lower die base of injection molding machines, used to fix plastic molds and produce them, and can also be used for rotating mechanical equipment, lathes, etc. Because of its compact structure, easy to use, light weight and high reliability, it has been widely used in various industrial production.
C station rotates the structure of the lower die seat
C station rotating lower die base is mainly composed of lower die base, rotary table, planetary gear reducer, motor and controller.
The lower die seat is the main part of the rotating lower die seat at station C, which is generally made of steel material, the shape is usually a cylinder, the bottom center is the hole for installing the injection molding machine, and the installation screw holes are opened around.
The rotary table is the core component of the rotating lower die seat at station C, which is mainly made of steel and other metal materials. The design is usually round or square, with screw holes corresponding to the lower die seat. The turntable is connected under the lower die seat, and the conversion between the upper die and the lower die is completed by rotation. The turntable also has a handle outside for easy operation and is equipped with a brake.
The planetary gear reducer is the transmission part, which realizes the conversion of the lower die by rotating the turntable. In the C station rotary lower die seat, the reducer is usually installed inside the lower die seat, which can help the turntable easily change the Angle.
The motor is the driving device, usually installed in the bottom center of the lower die seat, and is directly connected to the turntable through the reducer. When the motor starts, the planetary gear reducer will play a slowing role in driving the turntable. The positive and negative rotation of the motor is controlled by the electronic control system to realize the conversion of the mold base under the rotation of C station.
The controller is the part that controls special functions such as swing. The controller is usually composed of an electrical box, a circuit board and keys. Through a series of circuit control, C station rotating lower die seat can realize the function of swinging back and forth, automatic reset and so on.
The use of rotating lower die seat in station C
C station rotary lower die base is mainly suitable for the rotation of the fixed position of the lower die base of injection molding machine and other hydraulic equipment. When the mold of the injection molding machine needs to be processed and produced at different angles, it is necessary to rotate the lower mold base at station C to realize the change of mold position.
The following points need to be noted when using C station to rotate the lower die seat:
Before use, check whether the rotating lower die seat at station C is installed firmly and adjusted.
When adjusting the position, the motor power should be turned off first, and ensure that the turntable stays at the bottom safely, and the handle can be used to gently rotate the turntable.
Do not easily change the circuit of the equipment, otherwise it may cause equipment failure.
When replacing the mold, the power supply must be turned off and the turntable must be stopped.
When not used for a long time, dust should be removed and maintained, and lubricating oil should be added to the lower mold seat and the turntable to ensure the long-term use effect of the equipment.
In short, C station rotary lower die seat is a commonly used industrial equipment. When in use, the equipment should be kept in good condition and stable operation to avoid failures and accidents, so as to ensure production efficiency and ensure the safety of workers.
